California SB 54: the Plastic Pollution Prevention and Packaging Producer Responsibility Act

California Senate Bill 54, the Plastic Pollution Prevention and Packaging Producer Responsibility Act, was signed by Governor Gavin Newsom on June 30, 2022[1]. Permanent regulations took effect May 1, 2026[1]. Circular Action Alliance is the inaugural single Producer Responsibility Organization, selected by CalRecycle on January 5, 2024[1][2]. The program begins on or before January 1, 2027. By 2032, the law requires 100% of California packaging to be recyclable or compostable, 25% source reduction of plastic packaging, and 65% recycling of single-use plastic packaging[1]. The PRO must additionally remit $500 million annually to the California Plastic Pollution Mitigation Fund from 2027 through 2037[2].

What SB 54 covers

SB 54 is California's extended producer responsibility law for packaging and plastic single-use food serviceware. It shifts the cost of end-of-life management of these materials onto producers, who fund recycling infrastructure improvements through fees collected by an approved Producer Responsibility Organization[1].

The law was signed June 30, 2022 (PRC Division 30, Part 3, Chapter 3, Article 4). Formal rulemaking ran 2024 and 2025. On March 7, 2025, Governor Newsom directed CalRecycle to restart the regulations[2], which extended the rulemaking timeline. The Office of Administrative Law approved the permanent regulations on May 1, 2026 and they became effective on filing[1].

SB 54 sits alongside California SB 343, the truth-in-recycling-labelling law that defines criteria for the "recyclable" claim on packaging in California. SB 54 references SB 343 for recyclability determinations[1]. Together, the two laws affect packaging obligations and the basis for recyclability claims in California.

The 2032 targets

By January 1, 2032, the PRO is required to ensure on behalf of producers[1][2]:

  • 100% of single-use packaging and plastic food serviceware sold into California is recyclable or compostable.
  • 25% reduction in single-use plastic packaging and food serviceware (measured against the source reduction baseline CalRecycle published December 31, 2024).
  • 65% recycling rate for all single-use plastic packaging and food serviceware.

CalRecycle published the source reduction baseline and Source Reduction Baseline Technical Report on December 31, 2024[2]. The Covered Material Categories list, with recyclability and compostability determinations for each category, was updated December 31, 2025 and includes a first-ever recycling rate determination for each category[1].

Timeline and current status

The current SB 54 implementation timeline from CalRecycle and CAA[1][2]:

  • June 30, 2022: SB 54 signed.
  • January 5, 2024: CAA selected as the inaugural single PRO.
  • January 1, 2025: EPS food serviceware producers required to demonstrate 25% recycling rate; demonstration not adequately made, so EPS food serviceware sale, distribution, and import is now prohibited in California[1].
  • November 15, 2025: Producer reporting data due.
  • December 31, 2025: Updated Covered Material Categories list with recyclability and recycling rate determinations published.
  • May 1, 2026: Permanent regulations approved and effective. CalRecycle producer guidance webpage updated.
  • Mid-2026 (expected): PRO submits Plan; SB 54 Advisory Board reviews and offers written comments.
  • On or before January 1, 2027: CalRecycle approves the Plan; program begins.
  • March 1, 2027: PRO remits first California Plastic Pollution Mitigation Fund fees ($500 million annual).
  • July 1, 2027: PRO remits first administrative fees to CalRecycle.

CAA published illustrative California producer fees on May 1, 2026[2]. Final 2027 fee schedule is expected to follow the approved Plan. As of mid-2026, definitive per-category per-pound fees are not yet published at the same level of detail as Oregon's 2026 schedule.

Who has to comply

SB 54 applies to producers of residential and commercial single-use packaging and plastic single-use food serviceware sold into California. The producer definition under California law follows the same general logic as other US state EPR schemes: the entity that first places the covered material on the California market[2]. In practice this can be:

  • The brand owner, when they sell their own packaged product into California directly.
  • The importer or first seller, when an external brand's products are brought in from outside California.
  • Private-label suppliers, when packaging is sold under a retailer's own brand and the supplier is the legal first-seller.

Covered producers must register with CAA unless they qualify for an exemption or intend to submit an individual compliance plan under applicable law[2]. Registered producers gain access to CAA's producer education forums, including the Producer Working Group, and the detailed reporting guidance.

CAA registration also covers Colorado and Oregon EPR producer obligations under those states' EPR laws (Colorado registration deadline was October 1, 2024; CAA submitted a list of registered producers to Oregon DEQ on September 27, 2024)[2]. Producers shipping into multiple CAA-administered states register once.

California fees and an Oregon comparison

Oregon's 2026 producer fee schedule is currently the most concrete worked example of CAA fee modulation. Published October 29, 2025, the schedule prices PE flexible film at 43.0 ¢/lb, PP flexible film and Plastic Laminates and Other Flexible Plastic Packaging at 102.0 ¢/lb, and aluminium containers at 6.0 ¢/lb[3].

California's structure will be similar in modulation logic but the specific per-category fees may differ. Two factors are likely to affect California-specific rates:

  • The $500 million annual mitigation fund obligation, which is in addition to the cost of the recycling system itself. This is unique to California among the current CAA-administered states.
  • California's SB 343 recyclability criteria, which set a higher bar for what qualifies as "recyclable" than the APR Design Guide alone. Structures that meet APR Preferred but do not meet SB 343 criteria may be classified differently in California than in Oregon.

The CAA illustrative fees published May 1, 2026 provide an early comparison of California material categories[2]. Final fees for the 2027 program year are expected following CalRecycle's approval of the PRO Plan in mid-2026.

What packaging buyers should check

  • Production volume by Covered Material Category for California-bound product. CAA reporting requires per-category mass data; producers without this data at SKU level have a data-collection problem to solve before the next reporting cycle.
  • Recyclability classification per the SB 343 criteria for each material in your portfolio. Non-recyclable structures will pay the higher fee tier under whatever final schedule CAA publishes.
  • Whether the producer entity is correctly identified. Importers, private-label suppliers, and brand owners should each test which entity is the legal first-seller into California for each SKU. The classification is not always intuitive and the wrong answer creates registration and reporting gaps.
  • The CAA illustrative fees published May 1, 2026. They are not the final schedule but they are the strongest indicator the PRO has yet provided of relative per-category cost.
  • SB 343 labelling rules for any "recyclable" chasing-arrows claim on California-bound packaging. The criteria for a permitted recyclable claim are stricter than the underlying APR or CEFLEX framework rules[1].

References

  1. California Department of Resources Recycling and Recovery (CalRecycle). SB 54: Plastic Pollution Prevention and Packaging Producer Responsibility Act program page. calrecycle.ca.gov
  2. Circular Action Alliance. California program page. circularactionalliance.org/california
  3. Circular Action Alliance. 2026 Oregon Producer Fee Schedule. Published October 29, 2025. circularactionalliance.org/producer-resource-center